Customize Marauders more with Stickers!

Have you opened your Task Force army? Have you pledged for your Valkyries? Have you already tried EVERY possible armor combination!? Well don’t fear Marauder “Gun Runners” still have you covered… literally cover with STICKERS! Patches, emblems, logos, insignias .. deck out your troops even farther!

ONE (1) complete sheet of custom die cut stickers.  Incredibly detailed stickers are perfect size to use ON 1:18 scale figures and accessories.  Die-cut stickers are just “peel and stick”…no water or cutting!  Stickers are made out of a VERY thin film to allow for a realistic use on the figures (NOT “big & thick” material like is commonly used).  The sheet has a wide variety of sticker styles: Country flags in “bright” and muted colors (US, UK, Germany, Brazil, Canada, Australia), unit patches, Marauder Task Force “Skull/Knife” logos, miniature beret shields, name badges…even “shark teeth” for use on helmets!  The MTF sticker sheet allows you to take your detail custom work to a new level! This is our first sticker sheet release and we will be adding MANY more sticker sheet designs to our assortment.  Sheet measures 4 inches by 4-1/2 inches.  

Make sure to Order your Sticker HERE before they’re GONE!

Tell us where you’re going to Stick Em on The Island Forums!

Read moreCustomize Marauders more with Stickers!

Marauder’s Valkyries Have Launched!

The wait is Over! Marauders “Gun Runners” and their highly anticipated follow up to their recent Marauder’s Task Force release have hit the ground running. The Kickstarter is up and with some exciting releases on hand! In less then 12 hours the Kickstarter has all ready nearly reached half of it’s initial funding goal. Which mean we should be on to those 16 Stretch goals quick! … Marauder’s knows us well too … saving those awesome red and crimson sets for the end just to lure us all in! Rest assured though, with all the way until September 14th to pledge i’m sure we’re going to see the team have to unleash a few more Stretch goals along the way!

Make sure to Support the Valkyries HERE!

Discuss which Pledge Level you’re throwing down for on the Island Forums!


“Thanks to your support, the launch of the original Marauder Task Force 1:18 scale action figure line was a tremendous success!   The momentum of the first MTF release spawned requests for more figures, more accessories, and demands for FEMALE Marauder Task Force team members.  We are delighted to introduce our female Marauder Task Force team members, the VALKYRIES, or as we fondly refer to them, “Vals.”

Each highly detailed Marauder Task Force VALKYRIES figure is fully articulated, features multi-role customizable design options, is fully factory painted and equipped with a wide variety of interchangeable accessories. As with the male MTF figures, the simple-to-customize figures are designed to work WITH “modular” gear & accessories. Most of the modular accessories from the original MTF figures WILL work with the new Val figures and vice versa. The action figures have a unique design versatility that allows for use in Sci-Fi, Police, Military, and Superhero roles. Basically, whatever scenario is required, the Marauder Task Force VALKYRIES figures can fill the need. The nameless, faceless minions are ideal for army building or to use as “backup” with other currently available action figures.

Each 1:18 scale action figure is approximately 4 inches tall, made from high tech ABS & PVC materials and produced AT a modern factory (NOT “castings” made out of “resin”). The figures feature an amazing level of sculpting detail and realistic authentic designs. For maximum poseability, each figure has a large number of articulation points to allow positioning in virtually any pose required.

“Modular” interchangeable accessories is the key feature to the Marauder GR Valkyrie Action Figure System. To assist the “customizers” in our hobby, the removable headgear & vests have “modular” attachment points which provide the ability to “mix & match” the assorted modular equipment as desired. Also, there are “modular” accessory mounting points ON the actual figure. The figures and accessories will be available in assorted colors.

There are several participation levels in our Kickstarter project. Everything from simple contributions, to single figure level options, to massive 50 figure “Valhalla” sets…all the way to limited “one of a kind” Paint Master prototypes. The higher the participation level, the better the value. To add to the event, there are several “Stretch” goals. If we hit the stretch goals MORE female Val figure styles will be available, NEW male MTF figure designs & body parts will be available to order and FREE bonus items will be added to specific participation levels.

If you’re looking for super detailed, articulated, fully painted, easy to customize 1:18 scale FEMALE action figures with interchangeable accessories…the Marauder Task Force Valkyries action figures are for you!

With YOUR support, we can make it happen!”


Read moreMarauder’s Valkyries Have Launched!

NJCC The Valkyries have LANDED!

Have you guys caught your breath yet?! No?! Too Bad!! Cause NJCC had Marauders coming full steam ahead! Marauders Task Force Valkyries have landed! If you missed out on the first Kickstarter and have been scrambling to find and get the figures you want then I’m sure your lesson has been learned. With the overwhelming flood of praise and positivity that Wave 1 has been greated with I have no doubt that Valkyries will have the both having to pump out and come up with last minute stretch goals after the base ones are blown out in the first few weeks!

These look like some of the female bucks and tooling that we have been waiting for for a long time!

Check out the Marauder Valkyrie discussion!

Be sure to check out Marauder Task force wave 1 and other fine products on the Marauder Gun Runners storefront!  And make sure to stop by the Boss Fight Studio Facebook page, since they designed the figures!

Read moreNJCC The Valkyries have LANDED!

NJCC Marauders Task Force reports for Duty!

With everyone still recovering from the assault on their mailboxes with the Marauders Task Force seizing the bulkhead of Kickstarter supporters doorsteps, Marauder’s “Gun Runners” didn’t let up. Not only showing up with carded versions of their mega popular line, but also putting on display several awesome inspirations for tricking them out and customizing to the max!

Be sure to join in on the Marauder Task Force wave 1 discussion!

Be sure to check out Marauder Task force wave 1 and other fine products on the Marauder Gun Runners storefront!  And make sure to stop by the Boss Fight Studio Facebook page, since they designed the figures!


Read moreNJCC Marauders Task Force reports for Duty!

Marauder Task Force Custom Configuration Photo Gallery

Now that you have the word that the Marauder Task Force figures are deploying the mail boxes everywhere, it’s time to feast your eyes on an awesome gallery full of custom configurations of Marauder Task Force figures, weapons and accessories thanks to [url=]DESTRO[/url]! The images give us a ton of combination options that you’ll be able to do with your MTF figures. We’ve only mirrored a small selection here, so make sure to check out the source article for much more Marauder Task Force goodness! Once you’ve had your fill, make sure to join us after the jump for discussion already in progress!

Read moreMarauder Task Force Custom Configuration Photo Gallery

Marauder, Inc. at NJCC!

The New Jersey Collector’s Convention announced that the Marauder Gun Runners will be at NJCC!

NJCC guest announcement MARAUDER “GUN RUNNERS”! The source for weapons & accessories scaled for use with ALL collectible 3-3/4 inch action figures. We carry accurate 1:18 scale miniature replica versions of authentic looking weapons or designs based on military & science fiction originals.

Marauder, Inc, at NJCC discussion!

Read moreMarauder, Inc. at NJCC!

Marauder Task Force Update!

We’ve got an update on the upcoming Marauder Task Force figures, courtesy Marauder “Gun Runners”!

Production is currently underway at the factory on the Marauder Task Force “replacement” figures. It took time, but after SEVERAL updated production samples, we finally approved all the engineering and material changes for the figures. Our friends at Boss Fight Studio were actually at the factory dealing with their own project, and were kind enough to check in on the MTF production. Delighted to say that all their reports were very positive!

Here are images of the MTF figures during various stages of the production/assembly process (looks like the body part dump outside of a civil war surgery tent…but you get the idea).

We are still on target for an early summer ship. After the Kickstarter reward packages ship AND start to arrive at their destinations, THEN the remaining figures & accessories will go live on our website. Thanks again for your support and patience!

…And we use to think that “Gun-Running” was challenging!

Thanks again!


Read moreMarauder Task Force Update!

Marauder Gun Runners tease MTF “Valkyries”!

Our friends over at Marauder Gun Runners hot on the heels of finishing up and getting prime to release their Marauders Task Force are already looking to the horizon. That horizon being “Valkyries“!

‘Hey Folks!

Here is a little “teaser” for our NEXT figure project! More details to follow as we complete the current MTF figure roll-out.

Read moreMarauder Gun Runners tease MTF “Valkyries”!